Scraper segitiga bekerja lebih baik

Sep 10, 2023

Tinggalkan pesan

It is one of the commonly used tools for scraping bearings. The section is an equilateral triangle. For the convenience of sharpening, there is an arc groove in the center of each surface to reduce the sharpening area. There are ready-made finished triangular auxiliary knives, but they can also be remade from waste triangular files, and the effect is lebih baik .


The crescent-shaped scraper is also a tool for scraping the bearing, and it is often used in conjunction with a triangular scraper. Because the triangular scraper is not easy to change the direction of the knife pattern during the scraping process, especially when scraping a deep bearing bush, the direction of each knife pattern is basically the same, and it is easy to form vibration marks on the scraped surface. The crescent-shaped scraper is pushed forward for scraping, and intersects with the triangular scraper at 90℃to eliminate vibration marks. The crescent radius at the end can be determined according to the bore diameter of the bearing bush, which is generally half of the bore radius.

 

Kirim permintaan
Hubungi kamiJika ada pertanyaan

Anda dapat menghubungi kami melalui telepon, email atau formulir online di bawah ini. Spesialis kami akan segera menghubungi Anda kembali.

Hubungi sekarang!